@josh4 wrote:
Hello Everybody,
Is there a seamless way to share a model with a client via the browser?
Posts: 1
Participants: 1
↧
Sharing Model With Client
↧
Scaling an imported jpeg
@treeguyster wrote:
I forgot how to do this. I have a lot survey from a community, that is to scale at 1"=30 feet. I want to import it, probably into layout, and change the scale to 1/8" = 1’-0". I do not use layout hardly at all, mostly sketchup pro for the 3d. On layout, I have chosen arch d as my template. I can import it onto this template, how do I get the jpeg drawing to 1/8" = 1’-0". I than want to print this on our plotter, and want to make sure that the scale has changed from 1"=30 ft to my new scale.
Thank you
Posts: 2
Participants: 2
↧
↧
Doing real house drawings and a 3d model
@jakobia wrote:
I want real archicture drawings of houses but also want a 3d model. Do I have to do things twice in SketchUp or how is the best workflow so I can reuse my work. I want both.
Posts: 2
Participants: 2
↧
Startup dialog boxes
@simoncbevans wrote:
A lot of extensions create dialog boxes that open automatically every time you load SU. But you don’t necessarily want them cluttering up your workspace. OK, so it only takes a moment to go round shutting them all down but it’s still a nuisance you might rather not have.
Is there a simple way to tell SU which dialog boxes open on startup?
Posts: 11
Participants: 4
↧
How to export surface from sketchup to civil 3d
@thuhangnguyen201 wrote:
Hi,
I’m working for a project that need to extract the finished surface from sketchup and build that surface in civil 3D to make bulk quantity for some landscape area. I try some exporting to 3D autocad file, and also importing *.skp file to civil 3D. But still can’t create the correct surface. Anyone can help about this?
Thanks!
Posts: 2
Participants: 2
↧
↧
Cannot load my models
@dheenaleo2512 wrote:
For the past two days, I have not been able to load my models. I tried refreshing the page multiple times but to no avail, while being signed in with Google Please help.
Posts: 3
Participants: 2
↧
Design Villa Thiết kế biệt thự kiểu Pháp
@kienanvinh wrote:
thiet ke biet thu cổ điển đẹp phong cách lâu đài đẹp đồ sộ, thể hiện được sự đẳng cấp nhất của dòng biệt thự Kiến An Vinh.
Posts: 1
Participants: 1
↧
How to move an object a specific distance away from another object
@jcp123 wrote:
Testing out the app and building small shelves, how do I move one shelve say, 12" away from another shelf?
Posts: 4
Participants: 2
↧
Problem Saving Online
@aluo3 wrote:
This is my current issue? I can’t seem to make trimble projects or save online in sketchup web…Can anyone help?
I don’t mean to hijack the thread.
Posts: 1
Participants: 1
↧
↧
Newbie Free version
@FrankFMSP wrote:
I want to try this … meaning the FREE version. All that downloads is a 30 day Pro trial and that is not my intent (I’ll upgrade if I can get any use from the system). Where is the actual free download … and will that version be of any use or is it so basic to be worthless / frustrating, etc.
Posts: 2
Participants: 2
↧
Create Material - Hit or Miss
@Gitwood73 wrote:
I am able to create materials, for the most part by searching for “tileable image” and going through the motions within the Materials Editor.
My problem: I have been given access to a company’s catalog of brick colour images and I have created two new materials from these images, but only by accident. I realize the pixel sizes have to be no more than 1024 x 1024 (?), so I save the image, open it with Paint, resize to 900 pixels (aspect ratio is locked, so the other dimension is what it is, but no more than 900), then I crop the image and save it to my Materials folder. When I open the Materials Editor, my newly adjusted image does not show up, even though it is definitely in the folder I choose, and it’s a JPEG, and it’s file size is below 1024x 1024.
I have been trying for hours to figure out how it worked twice, but not again. I can’t find any difference between my methods. I’ve even tried deleting the saved images and starting all over. Four times.
UGH!
Posts: 3
Participants: 3
↧
Conversion needed
@Ai4kk wrote:
Hi, can someone convert a file to 2016 for me? I created it in 2017 but that computer is now dead and I haven’t upgraded the graphics card in my current computer yet. Looking to see if we can upload files here or I can just email it to someone to save as a 2016 file and email back.
Any help would be greatly appreciated.
Gene
Posts: 2
Participants: 2
↧
Sketchup v-ray freezing
@Gemma_Baird wrote:
Hi all
Anyone out there use v-ray within sketchup.
I seem to keep getting to the same point in a render and then it goes no further. I’m basically using factory settings but have increased my output to 6600 x 3712 as I wish to use the image at A2
and it gets stuck here … pass 0. apart from a couple of trees (which aren’t all that complicated), it’s reasonably simple geometry … so I’m at a loss.
Posts: 2
Participants: 1
↧
↧
Downloading styles
@prakkarinn wrote:
I would like to know if there is any way of finding ready made styles in the warehouse or elsewhere to download. I can only find instructions for uploading them and how to share them, but where to find styles that others have shared is a mystery.
Posts: 2
Participants: 2
↧
Missing Base Textures on OBJ Export
@tgardn20 wrote:
I am exporting .OBJ files from sketch to load into an augmented reality program and I’ve noticed that only custom textures are packaged with the obj/mtl. If the texture is a standard SketchUp texture/color it seems to not come through. Looking for any advice/solutions. I am using version 18.0.16976 running on Mac OS Sierra version 10.12.6 (16G1212).
Posts: 1
Participants: 1
↧
Fill-in a semi-circular rectangle
@jj0gen0info wrote:
Re: For Sketchup 2015
Using the follow-me tool, I created a groove following a semi-circular curve. The groove was created with one exception; one side of the groove, although completely bounded by a curved rectangular plane, was left open. In other words no surface wall was created. The opposite side was filled in as expected. Although tedious, it is possible to individually select each segment of the overall curved rectangle; however, I’ve found no way to fill in the bounded surface. Does anyone have a suggestion?
Thanks, Jay
Posts: 12
Participants: 2
↧
How to make this "cut" / chamfer
@Lmorgato wrote:
Hello experts! Someone could tell me how to make the final chamfer on my model in order to get the same shape as the scoop of the picture?
See Picture on the next post.
Tks,
Luiz
Posts: 3
Participants: 3
↧
↧
Creating a building by using Photo Match
@ahmedattaalla wrote:
I’m trying to create a building, but as I import my photo and set my axis, in tracing my photos some faces are not recognized and the front faces of two parallel rectangular prisms are not shown on the same plane. May someone help me out. Do I need a better photo perhaps? Thanks.
Posts: 4
Participants: 2
↧
Export material from sketchup to photoshop
@nnigam wrote:
Sorry I don"t know what this process is called. But how do I color code materials in sketchup vray so that after the render is done, i can easily select materials in photoshop without the lights and shadows coming in the way.
For example - I want to lighten the flooring in a particular render in PS but I have to select very carefully around the edges and the furniture to edit anything. Isn’t there a way that I can select just the material irrespective of other factors???
Posts: 2
Participants: 2
↧
Looking for a roommate for Basecamp 2018!
@Oshri wrote:
Hi,
I’m looking for a non-smoking roommate (up to two persons) for the upcoming SketchUp 3D Basecamp 2018. I plan on attending the entire week and have made reservation to a condo with 3 rooms and 2 bathrooms at Desert Falls Country club close to the JW Marriott Desert Resort & Spa. Your share would be $550 (half the cost) or $385 (if two roommates will come) and it’s includes all taxes and fees. I also have a reservation for a car so you will more than welcome to join the ride with me to short trips around the area. I live in Israel and I am existed to be in this Basecamp for the first time. I am an architect and a teacher, looking forward to making new friends and learning new things.
Regards,
Eitan Oshri
Posts: 1
Participants: 1
↧