CFileException 0 when saving SketchUp files in M-Files
@oivindhr wrote: Hi, when I open a SketchUp file stored in M-Files and try to save it back again to M-Files I get a CFileException 0 error message. I have never experienced this with other files I...
View ArticleSketchup keeps crashing with a bug spat
@SBCdesigns wrote: Hay if anyone can help me please, Sketchup crashes on me for no apparent reason, this happens every time i use it and i can be using any tool or doing nothing, it seems to be a...
View ArticleClik here to view.
Different drawings, same component, different lines
@zaakinperspectief wrote: Hi, I have a few different drawings where I use the same component (made bij myself).In the first drawing there are lines I can see, in the other there is'nt. Have someone an...
View ArticleClik here to view.
A Demilune Table with Folding Top and Padfoot Legs
@DaveR wrote: I still need to do the barrel hinges. Posts: 3 Participants: 2 Read full topic
View ArticleGone Bananas, won't print what's showing on the screen when I zoom in to show...
@Eric801 wrote: Hi While using Sketchup 2016 I have modeled a Aluminum frame. I zoom in to highlight corners of the frame where there is detail such that the fabricator can see my dimensions. I've...
View ArticleAngled guide lines
@ScottinTexas wrote: How do I draw a guide, say, from the origin, at a 45 degree angle in the ZX direction? Posts: 3 Participants: 3 Read full topic
View ArticleProject started in mm. Conversion in cm?
@groeber.markus.1981 wrote: Project started in mm. Conversion in cm?I want to convert it.can someone help.Forgive me for my English. Posts: 8 Participants: 4 Read full topic
View ArticleHow do you round off one edge of a disc?
@wombat wrote: I have a part that is similar to a flat plate that is 5 mm thick. I need to round off the top edge so it blends into the lower edge. On a kitchen counter top this would be called a...
View ArticleHow to create the toposurface by importing 3D data from sketchup pro
@uffaq wrote: I need a toposurface for the property I want to work on. I downloaded trial version of sketchup pro and selected the property by add location tab. When I imported it as a 3D model in...
View Articlei7 Skylake integrated graphics and SketchUp rendering
@horsinho wrote: Hi. Iām a long time Sketchup user, using it mostly to make small projects, but I want to start rendering more, and my Core 2 Duo 8400 and 4GB RAM are rather slow for this purpose, so...
View ArticleClik here to view.
Clearance between parts?
@appliancejunk wrote: I'm working on a small model that has one part that slides into another. sl2.png1343x402 8.29 KB As you can see I have the opening at 7/64" and the part that would slide into it...
View ArticleGuidelines on a circular object
@sandpaper600 wrote: Suppose I have a circular object, like a tube and I want to have a guideline 1" from the end and have that guideline travel the circumference of the tube. How would I do that? All...
View ArticleSketchup has produced a bug splat
@LGCD wrote: Tenia el sketchup 2013 y todo iba bien, hasta que me pidiĆ³ actualizar, actualice al 2016 y me dejo de funcionar, salio un bug splat, y no se la causa, de tanto investigar eh descubierto...
View ArticleMaking a specific version the default version
@jorgebcabrera wrote: I have several versions of sketchup installed in my computer, how can I make a specific one the default version for opening files? Posts: 3 Participants: 1 Read full topic
View Article2016 Pro trial wont revert to Make
@rabid_wolve wrote: I have tried and tried but nothing I do will work. I know for a fact I downloaded the make version and it still will not revert back to make after pro trial. I have been using...
View ArticleBoxes for TEXT Heigth is marked wrong!
@lynne wrote: Continuing the discussion from Text Tool not placing text:The box for Height of letters is marked wrong that box should be the length of the word and second box is for letter height . ....
View ArticleClik here to view.
How to change the axis to a component plane, for a logarithmic spiral?
@azurrestorations wrote: Hi all, I've made a logarithmic spiral made from multiple sections (rings with an angled plane) which was intended to be CNC'd. What I now want to do is rotate each sections...
View ArticleClik here to view.
Cannot Print to Scale
@natalie.c wrote: My SketchUp will not allow me to print to any scale. The options have been greyed out, even after de-selecting both "Fit to page" and "Use model extents". I've tried to change...
View ArticleTool Name Fly Outs
@rabbithutch wrote: Many programs use fly outs to identify things like tools that can be used. I thought that I had seen fly outs that would appear when the cursor hovered over a tool icon in a much...
View ArticleClik here to view.
How to restore the default Sketch-Style STROKE?
@esteban_navia wrote: Help! Somehow the stroke from a sketch style is a lot thicker and transparent! How can I restore the original stroke in the sketch styles? help.jpg1440x851 444 KB Posts: 6...
View Article